TR-180-PP is an 80/20 polyester-rayon poplin engineered for uniform shirt programs that require the no-iron convenience of polyester with the soft hand and matte finish of a natural fiber blend.
The higher polyester content (80% vs. the 65% used in standard PC poplin) delivers exceptional wrinkle resistance — shirts made from this fabric can be tumble dried and hung without ironing for most professional settings. The 20% rayon content softens the hand feel and eliminates the synthetic shine that 100% polyester poplin can show, giving the fabric a matte, cotton-like appearance.
At 180 GSM, this fabric is slightly heavier than standard shirting poplin (typically 120–150 GSM), providing better opacity and a more substantial feel — appropriate for corporate uniforms where a flimsy shirt would look unprofessional.
Excellent — 80% polyester content provides superior no-iron performance
Finishing
Pre-washed, heat-set, anti-pilling treated
TR Poplin vs PC Poplin for Uniform Shirts
Factor
TR-180-PP (80/20 TR)
PC Poplin (65/35)
Hand feel
Softer, smoother — rayon softens the hand
Crisp, slightly stiffer
Wrinkle resistance
Excellent — 80% polyester
Good — 65% polyester
Shine
Matte finish — no synthetic shine
Can develop shine with repeated pressing
Opacity
180gsm — fully opaque
120–150gsm — lighter, may require undershirt
Breathability
Good — rayon breathes better than cotton blends
Moderate
Cost per meter
Comparable
Comparable
Best for
Corporate shirts where no-iron + premium appearance are both required
General hospitality, high-volume programs
TR Poplin vs Cotton Poplin
Factor
TR-180-PP
100% Cotton Poplin (COT-PP-140)
Ironing required
No — tumble dry and hang
Yes — high-heat iron required
Hand feel
Soft, smooth
Soft, natural
Wrinkle resistance
Excellent — minimal care
Poor — wrinkles deeply
Cost per meter
Comparable
Comparable
Best for
Programs where no-iron convenience > “100% cotton” label
Programs where 100% cotton is a specification requirement
Fabric Hand & Appearance
Hand feel: Smooth, soft, with a clean poplin finish. The 20% rayon content is noticeable as a softer, more fluid hand compared to standard PC poplin. No synthetic or plasticky feel.
Appearance: Clean poplin surface with a matte, non-reflective finish. Colors appear warm and natural — the rayon content absorbs dye differently than polyester, creating depth. Fine rib texture visible on close inspection.
Drape: Lightweight with body — holds a collar and cuff structure cleanly. Skims the body without clinging.
Machine wash 60°C, normal cycle — industrial wash compatible
Bleaching
Oxygen bleach compatible — chlorine bleach acceptable on whites
Drying
Tumble dry medium — remove promptly, hang — no ironing needed
Ironing
Low iron (110°C) — typically not required
Dry cleaning
Permitted (PCE)
✅ No-iron performance: At 80% polyester content, TR-180-PP provides genuine tumble-dry-and-wear performance. Shirts can be machine washed, tumble dried on medium, and hung immediately — the fabric recovers wrinkles within minutes of hanging. For shirt programs where ironing labor is a significant operational cost, this fabric eliminates it.
FAQ
Q: Is 180 GSM too heavy for a uniform shirt? A: No — 180 GSM is heavier than standard dress shirt poplin (120–150 GSM) but this is intentional. The additional weight provides better opacity (no sheerness), a more substantial professional feel, and better durability through industrial laundry. It is the standard weight for corporate and hospitality uniform shirts.
Q: Does this fabric need ironing? A: No — the 80% polyester content provides excellent wrinkle recovery. After tumble drying on medium, hang the shirt immediately and it will be ready to wear within minutes. For a pressed finish, a quick low-heat iron will sharpen the collar and cuffs, but it is not necessary for a professional appearance.
Q: Does the 20% rayon content affect wash durability? A: No — rayon is a durable fiber when properly processed. The 80/20 TR blend is one of the most reliable uniform shirting specifications. In industrial laundry, TR-180-PP typically lasts 12–18 months before replacement.
Q: Is this fabric suitable for embroidery with corporate logos? A: Yes — the Ne 45 × Ne 45 poplin weave holds embroidery cleanly. The 180gsm weight provides enough body to prevent puckering around high-density stitch areas. Use standard 40–60 weight embroidery thread.
Q: How does this compare to your 100% cotton poplin (COT-PP-140)? A: TR-180-PP does not need ironing; COT-PP-140 does. COT-PP-140 has a 100% cotton label that some programs require. TR-180-PP has a more substantial weight and better wrinkle recovery. For programs that want “no-iron” and do not require a 100% cotton specification, TR-180-PP is the better choice.
Reviews
There are no reviews yet.