PCT-190-MW — PC Twill 190gsm with Moisture-Wicking Finish
PCT-190-MW is a 65/35 poly-cotton twill treated with a hydrophilic moisture-wicking finish — engineered for front-of-house hospitality and corporate uniform shirts where a crisp professional appearance must be maintained through active shifts in warm environments.
The 65% polyester content provides wrinkle resistance, shape retention, and industrial wash durability. The 35% cotton delivers breathability and natural comfort against skin. The Twill 2/1 weave gives a clean, structured appearance appropriate for front desk, concierge, reception, and management uniforms.
The moisture-wicking finish works by adding hydrophilic (water-attracting) chemistry to the fiber surface. Instead of sweat pooling on the skin or being absorbed into the fabric where it stays wet, the finish pulls moisture through the fabric to the outer surface, where it spreads and evaporates rapidly.
≥80mm wicking height retained after 30 industrial washes (ISO 6330)
Drying Rate
Approximately 40% faster than untreated equivalent
Shrinkage
≤2.5% after 5 washes (ISO 6330)
Colorfastness to Washing
Grade 4 (ISO 105-C06)
Colorfastness to Light
Grade 4 (ISO 105-B02)
Colorfastness to Perspiration
Grade 4 (ISO 105-E04)
Pilling Resistance
Grade 4 (ISO 12945-2)
Tensile Strength (Warp)
≥900 N (ISO 13934-1)
Tear Strength (Weft)
≥25 N (ISO 13937-2)
Finishing
Pre-washed, heat-set, moisture-wicking treated
Treated Finish vs Inherent Wicking — Why Treated for This Fabric?
This fabric uses a hydrophilic finish rather than inherent wicking fiber because the 65/35 poly-cotton composition requires it. Cotton does not wick — it absorbs. To make a cotton-rich fabric wick moisture rather than hold it, a hydrophilic finish must be applied.
Factor
Inherent (100% Polyester Knit)
Treated Finish (65/35 PC Twill)
Mechanism
Fiber cross-section geometry
Hydrophilic chemical coating
Wash durability
Permanent
30–50 washes — gradual decline
Initial wicking performance
≥120mm
≥100mm
Cost
Moderate
Low
Best for
Knit polos, activewear
Woven shirts, trousers — where appearance matters
The treated finish is the appropriate choice for woven uniform shirts. The wicking performance is strong out of the box and remains functional through the typical lifespan of a uniform shirt program (12–18 months / 30–50 washes).
Fabric Hand & Appearance
Hand feel: Standard PC twill hand — crisp, clean, professional. The moisture-wicking finish is invisible and does not change the hand feel or appearance.
Appearance: Clean twill surface. No visible residue. Dyes evenly. Accepts embroidery and badge attachment without issue.
Breathability: Unaffected by treatment. The base fabric’s natural moisture vapor transmission is preserved.
Applications
Application
Why PCT-190-MW
Hotel front desk & concierge shirts
Stays dry through active front-desk shifts — no visible sweat marks
Corporate office uniform shirts
Professional appearance with moisture management for all-day comfort
Hospitality management uniforms
Crisp twill appearance + active cooling for back-of-house walk-throughs
Restaurant host shirts
Dry through multi-hour seating shifts in warm dining environments
Convention & event staff shirts
Active roles in crowded, warm venues — moisture control is essential
Casino floor staff uniforms
Long standing shifts in climate-controlled but warm environments
Airport check-in & gate agent shirts
Professional appearance + comfort through extended duty periods
Available Combined Finishes
Finish Combination
Best For
Moisture-Wicking (Standard)
General hospitality, corporate
Moisture-Wicking + Wrinkle-Resistant (DP)
Executive programs — no-iron + stay-dry
Moisture-Wicking + Antimicrobial
Healthcare reception, F&B — dry + hygienic
Moisture-Wicking + Stain-Release
Restaurant, F&B — dry + spill protection
Moisture-Wicking + Anti-Static
Kitchen environments, electronics cleanroom
Color Options
Stock Colors (8 — held in continuous inventory):
Color
Application
White
Universal — hospitality, corporate, medical
Light Blue
Hospitality, corporate — most popular after white
Navy
Corporate, management — highest volume in business settings
Black
Hospitality — management, F&B leadership
Charcoal
Corporate, contemporary programs
Khaki
Resort, casual corporate
Ivory
Spa, resort, luxury hospitality
Light Grey
Corporate, modern office uniforms
Custom Dye:
Pantone / Lab-dyed match: ≤0.5 delta E
MOQ: 500 meters per color
Bulk lead time (custom dye + moisture-wicking): 25–30 days
Machine wash 60°C, normal cycle — industrial wash compatible
Bleaching
Do not bleach — chlorine degrades hydrophilic finish
Drying
Tumble dry medium, or hang dry
Ironing
Medium iron (150°C), steam
Dry cleaning
Permitted (PCE)
⚠️ To maximize moisture-wicking lifespan: Avoid chlorine bleach and fabric softener. Chlorine attacks the hydrophilic chemistry. Fabric softener coats the fiber surface and blocks moisture transport. Use oxygen bleach and skip the softener — the wicking performance will last 30+ washes. After the finish gradually fades, the fabric reverts to standard PC twill properties — it does not lose FR or structural functionality, only wicking speed.
FAQ
Q: How long does the moisture-wicking finish last? A: The finish maintains ≥80mm wicking height for 30+ industrial wash cycles (60°C, alkaline detergent). After 30 washes, wicking performance gradually declines as the hydrophilic chemistry slowly hydrolyzes. At typical uniform shirt replacement cycles (12–18 months), the finish remains functional for the garment lifespan.
Q: Does fabric softener affect the wicking performance? A: Yes — significantly. Fabric softener coats the fiber surface with a hydrophobic layer that blocks moisture transport. One wash with softener can reduce wicking height by 40–50%. We recommend omitting fabric softener entirely from the laundry protocol for moisture-wicking treated fabrics.
Q: Is the moisture-wicking finish visible on the fabric? A: No. The finish is applied as an aqueous chemical treatment in the dyeing/finishing stage. It leaves no visible residue, does not change the fabric hand feel, and does not affect dye shade or embroidery quality.
Q: Can I get the moisture-wicking and wrinkle-resistant (DP) finish on the same fabric? A: Yes. The two finishes are compatible and can be applied in a single finishing pass. This is a popular combination for executive hospitality programs where shirts must look crisp and stay dry. Combined finish adds approximately 1 week to lead time.
Q: What is the most popular specification for hotel front desk shirt programs? A: White or Light Blue + moisture-wicking + wrinkle-resistant DP finish is the most common specification for 4-star and 5-star hotel front desk programs. The DP finish reduces ironing cost for large uniform volumes; the moisture-wicking keeps front desk staff comfortable and dry-looking through long shifts.
Reviews
There are no reviews yet.